中文  |  English
HOME > PRODUCTS > Multi-function hot air welding machine

Multi-function hot air welding machine

MODELS:YC-RBW13
SERIWS:Hot air sealing machine
FACTORY:Jiangmen jianghai ye weicheng machinery factory
DETAILED PARAMETERS:
Power Consumption50-60Hz 220V50-60Hz
Rated Power2500W
Rated current20A
Woking Speed1m-15m/min
Working pressure3-6kg/cm2
Upper Roller Pressure.0.5kg/cm2-4.5kg/cm2
Nozzle width10-50mm
.Upper Roller Lift20-30mm
Upper Roller Diameter Ф 80mm
 Width of the roller10-50mm
emperature up to 750C
Adhesive Tape Width10-60mm
Exterior dimensions1700x550 x1730mm
Vet weight210kg
APPLICATION SCENARIOS:

Whole design: No table, extra-wide lower prop design, adjustable angle of the lower prop, suit to processing the Large tents, Rubber boats, Air Balloon, Seamless sewing products etc.

Control system: Designed with original computer chips, it can be programmed according to the needs of users. The microcomputer automatic controls the work of  the whole machine, with simple operation, stable action performance , and low failure rate.

Display: It is a 4.3 inch touch screen and can directly show all kinds of data.  Temperature Control: Temperature is Automatic tracking controlled by computer.

Speed Control: The temperature is controlled by Computer Chip, two-speed motor, separate upper and lower roller motor, can adjust its speed.

Protective Measures: Turn on the Heating button, later turn it off and then delay the shut down, get into count down.

APPLICATION OF THE PRODUCTS:
友情链接:连云港瑞拓文化传媒有限公司  沈阳浩蓝科技有限公司  昆明双艺建筑装饰工程有限公司  北京广大汇通工程技术研究院  重庆三点零企业管理咨询有限公司  唯蜜信息科技(宁波)有限责任公司  济南立丰木屋有限公司  中国农业大学吉林梨树实验站  上海型甜生物科技有限公司  厦门市森瑞达环境工程有限公司